KINAX WT710/711角位变送器(GMC)

现场装角位变送器

The KINAX WT 710 converts the angular position of a shaft into a load-independent direct current signal, proportional to the angular position.

＊ Measuring range limits 0...5 to 0...270°
＊ Measuring output: DC current signal (load-independent, 2-, 3- or 4-wire connection)
＊ Potentiometer for adjusting span / Optimum matching of desired measuring range
＊ Direction of rotation: Output signal increases for clockwise or counter-clockwise rotation
＊ Capacitive scanning system / No wear and low annual maintenance
＊ Low influence from bearing play, < 0.1%
＊ Accuracy =0.5% for ranges <150°
＊ Torque < 0.001 Ncm
＊ Drive shaft fully rotatable without stops at instruments without addional gear
＊ Available with type of protection "Intrinsic safety" EEx ia IIC T6 / Can be mounted in hazardous areas
＊ Unit in field type housing / Compact for building onto other equipment and plant